If your water heater is giving you trouble and you don’t have the time or skills to make the necessary repairs, you may want to call a plumber. A plumber at Water Heater Repair Boise can help you find the leak and tighten any loose connections. However, you should never try to fix the problem on your own. Make sure you turn off the water heater and leave it unplugged for at least an hour before you attempt any repairs. Also, move any appliances out of the way and cordon off the area so you won’t endanger yourself or someone else.
If you’re handy with mechanical equipment, you can probably fix minor problems on your own. However, many problems are more complicated and may require professional help. Hiring a plumber is a safer and more affordable option than attempting to repair the problem yourself. In addition, a plumber knows exactly what to do with the parts and can use the warranty in some cases.
If your water heater is making a popping sound, the pilot light is most likely a malfunction. This can be caused by low gas pressure or a malfunctioning gas control valve. If you have a malfunctioning gas valve, you can call a plumber or check with your gas company. Another problem that can cause a pilot light to go out is a dirty orifice. If the orifice is too dirty, the flame will not be able to sustain itself. Using a long lighter can help.
If your water heater is not working properly, the first step to fix it is to reset the high-temperature limit switch. If the limit switch is functioning properly, it will click when pushed. If it doesn’t, it may need to be replaced. Another step is to check the temperature-pressure relief valve. This valve helps release excess pressure caused by a buildup of steam. If this is faulty, you should replace it as soon as possible.
Another common problem with water heaters is leakage. The water will corrode the tank and cause microscopic cracks. Water leakage can also occur from the top of the unit. This may be due to loose connections to the hot water out pipes or water inlet pipes. The leaks will require a plumber to fix them. If you can’t figure out what is causing the leak, you may need to replace the whole unit.
Water heater repair costs vary greatly. You should expect to spend between $100 and $591 on a repair. However, prices will depend on the kind of repairs you need. A plumber can charge up to $150 per hour. But the price will depend on the nature of the problem and the quality of the job. A more experienced plumber can charge more but ensure a quality repair.
If you suspect a leak, you should contact a plumbing company immediately. In some cases, you might only need a small repair, but it is better to get it fixed by a professional. Some major issues, such as corrosion, will require a full unit replacement, while some may be fixable. If you have a water heater that is less than seven years old, a water heater repair may not be necessary. However, if you have a leak, the unit may need to be replaced.
You can also use a water heater to help you save money on energy bills. Many modern models are energy efficient and last anywhere from ten to twenty years. However, if you use your water heater a lot, it may not last as long as you think. If the water heater is older, you might want to consider getting a new one to save money.
